BMW X5 PLUG-IN HYBRID Owner'S Manual Download Page 62

Page: 62 / 432

Functional requirements

▷

The battery is sufficiently charged.

▷

The external temperature is above
14 ℉/-10 ℃.

▷

Vehicle is parked in a horizontal position.

▷

Hazard warning system is switched off.

▷

Selector lever position P is engaged.

▷

Engine is sufficiently cooled down.

Preparing the vehicle

▷

Park the vehicle safely away from the public
road.

▷

Cellular network reception must be ensured
so that an error message can be sent, for in‐
stance if the installation is terminated.

▷

Close the windows.

▷

Close the glass sunroof.

▷

Close the tailgate.

▷

Remove energy consuming devices, such as
a mobile phone.

▷

Unhitch any trailer or load carrier.

▷

The vehicle key is in the vehicle at the start of
the installation.

▷

Switch off the exterior lighting.

Additional vehicle related functional require‐
ments are shown on the Control Display.

Install the upgrade later

The installation of the upgrade can be carried out
at a later time.
Via iDrive:

"CAR"

"Settings"

"General settings"

"Remote Software Upgrade"

"Start upgrade now"
Follow the instructions on the Control Dis‐
play.

Functional limitations

During the upgrade, the majority of functions is
temporarily unavailable, for instance:

▷

Hazard warning system.

▷

Central locking system.

▷

Parking lights.

▷

Horn.

▷

Alarm system.

▷

Emergency Request.

▷

Power windows.

▷

Glass sunroof.

▷

Checking the fuel filler flap lock.

The driver's door can be locked and unlocked
from the outside using the integrated key.

Malfunction

In the event of a malfunction, follow the instruc‐
tions on the Control Display or in the BMW Con‐
nected app.
If the malfunction cannot be remedied, contact a
dealer’s service center or another qualified serv‐
ice center or repair shop.

Seite 62

CONTROLS

BMW Remote Software Upgrade

Online Edition for Part no. 01405A03663 - II/20

Summary of Contents for X5 PLUG-IN HYBRID

















































































































































































































































































































































































































































Search results

Summary of Contents for X5 PLUG-IN HYBRID

Reviews:

Related manuals for X5 PLUG-IN HYBRID

Brands by name

Popular brands

BMW X5 PLUG-IN HYBRID, Owner'S Manual

Search results

Summary of Contents for X5 PLUG-IN HYBRID

Reviews:

Related manuals for X5 PLUG-IN HYBRID

Brands by name

Popular brands