BMW X5 PLUG-IN HYBRID, Owner'S Manual

Page: 260 / 432

Park assistance button
Camera
The camera lens is located in the handle of the
tailgate.
The image quality may be impaired by dirt. If
necessary, clean the camera lens.
Switching on/off
Switching on automatically
The system is switched on automatically if selec‐
tor lever position R is engaged when the engine
is running.
Automatic deactivation during
forward travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
Depending on the vehicle
equipment: switching on/off
manually
Press the park assistance button.
▷ On: the LED lights up.
▷ Off: the LED goes out.
The parking assistance functions are shown on
the Control Display.
Switching the view via iDrive
If the rearview camera view is not displayed,
change the view via iDrive:
1. If necessary, tilt the controller to the side.
2. "Rear view camera"
The rearview camera image is displayed.
Functional requirements
▷ The tailgate is fully closed.
▷ Keep the recording range of the camera
clear. Protruding cargo or carrier systems and
trailers that are not connected to a trailer
power socket can restrict the visibility range
of the camera.
Display on the Control Display
Function bars
The assistance functions can be activated man‐
ually via the function bars on the sides of the
Control Display.
Via iDrive:
1. Move the Controller to the right, if needed.
2. With corresponding equipment:
"Camera image"
3. ▷
"Parking aid lines".
Pathway lines and turning radius lines are
displayed.
▷ "Obstacle mark.".
Depending on the vehicle equipment, the
obstacles detected by PDC Park Distance
Control are displayed by markings.
Zoom on trailer hitch:
1. Move the Controller to the left, if needed.
2. "Trailer hitch".
A zoomed image of the trailer hitch is shown.
More than one assistance function can be active
at the same time.
Seite 260
CONTROLS
Driver assistance systems
260
Online Edition for Part no. 01405A03663 - II/20