BMW X5 PLUG-IN HYBRID Owner'S Manual Download Page 420

Page: 420 / 432

Front passenger seat functionality

116

Front-seat passenger airbags, automatic deacti‐

vation

188

Front-seat passenger airbags, indicator light

Fuel

Fuel filler flap

Fuel filler flap, unlocking manually

Fuel gauge

Fuel recommendation

Fuel, tank capacity, see Technical data

410

Functions, hybrid system

133

Fuses

395

Garage door opener, see Integrated Universal

Remote Control

299

Gasoline

383

Gear change, Steptronic transmission

148

Gear shift indicator

169

General driving notes

323

General settings

Gentleman function, see Front passenger seat

functionality

116

Gesture Control

Gestures, see BMW Gesture Control

Glare shield, see Sun visor

302

Glass sunroof, electric

110

Glass sunroof, initialize the system

112

Glove compartment

310

GPS, navigation, see Owner's Handbook for

Navigation, Entertainment, Communication

Gross vehicle weight, approved

411

Gross weight, permissible for trailer towing

411

Handbrake, see Parking brake

141

Hand-held transmitter, alternating code

300

Hands-free device, see Owner's Handbook for

Navigation, Entertainment, Communication

Hazard warning flashers

396

HDC Hill Descent Control

229

Head airbags

186

Headlight control, automatic

Headlight glass

Headlights, replacing, see Lights and bulbs

393

Head restraints and seats

113

Head restraints, front

118

Head restraints, rear

119

Head-up Display

174

Head-up Display, care

407

Head-up Display, store position, see Memory

function

123

Heated steering wheel

High beams

High beams/low beams, see High-beam Assis‐

tant

180

High-voltage battery, charge state indicator

158

Hill Descent Control HDC

229

Hills

325

Hill start assistant, see Drive-off assistant

226

Holder for beverages, see Cup holders

312

HomeLink, see Integrated Universal Remote

Control

299

Homepage, see Internet

Hood

381

Horn

Hotel function, see Valet parking mode

103

Hot exhaust gas system

323

Humidity in the headlight, see Headlight

glass

393

HYBRID button

133

HYBRID COMFORT, see Driving Dynamics Con‐

trol

138

HYBRID, driving with hybrid drive

133

HYBRID ECO PRO, Driving style analysis

335

HYBRID ECO PRO, see Driving Dynamics Con‐

trol

138

HYBRID STANDARD, see Driving Dynamics

Control

138

Hybrid system, adapting to the course of the

road

138

Hybrid system, automatic deactivation

Seite 420

REFERENCE

Everything from A to Z

420

Online Edition for Part no. 01405A03663 - II/20

Summary of Contents for X5 PLUG-IN HYBRID

















































































































































































































































































































































































































































Search results

Summary of Contents for X5 PLUG-IN HYBRID

Reviews:

Related manuals for X5 PLUG-IN HYBRID

Brands by name

Popular brands

BMW X5 PLUG-IN HYBRID, Owner'S Manual

Search results

Summary of Contents for X5 PLUG-IN HYBRID

Reviews:

Related manuals for X5 PLUG-IN HYBRID

Brands by name

Popular brands