BMW X5 PLUG-IN HYBRID, Owner'S Manual

Page: 65 / 432

The setting is stored for the driver profile cur‐
rently used.
Language
Setting the language
Via iDrive:
1. "CAR"
2. "Settings"
3. "General settings"
4. "Language:"
5. "System language"
6. Select the desired setting.
The setting is stored for the driver profile cur‐
rently used.
Setting the voice dialog
Set the voice dialog for the voice activation sys‐
tem.
Additional information:
Setting the voice dialog, refer to page
53 .
Setting the units of
measurement
Depending on the country version, you can set
the units of measurement for some values, for in‐
stance consumption, distances, and tempera‐
ture.
Via iDrive:
1. "CAR"
2. "Settings"
3. "General settings"
4. "Units"
5. Select the desired menu item.
6. Select the desired setting.
The setting is stored for the driver profile cur‐
rently used.
Trip data settings
Concept
The intervals in which the trip data will be reset
can be configured.
Resetting trip data
Via iDrive:
1. "CAR"
2. "Settings"
3. "General settings"
4. "Reset trip data"
5. Select the desired setting.
Speed warning
Concept
A speed limit can be set that when reached will
cause a warning to be issued.
General information
The warning is repeated if the vehicle speed ex‐
ceeds the set speed limit again, after it has drop‐
ped below it by 3 mph/5 km/h.
Adjusting
Via iDrive:
1. "CAR"
2. "Settings"
3. "General settings"
4. "Speed warning"
5. "Warning at:"
6. Turn the Controller until the desired speed is
displayed.
7. Press the Controller.
Seite 65
General settings
CONTROLS
65
Online Edition for Part no. 01405A03663 - II/20