BMW X5 PLUG-IN HYBRID, Owner'S Manual

Page: 248 / 432

▷ Above approx. 43 mph, 70 km/h: lane mark‐
ing on both sides is detected.
▷ Below approx. 43 mph, 70 km/h: lane marking
on both sides or a vehicle driving ahead is de‐
tected.
▷ Hands on the steering wheel rim.
▷ Wide curves.
▷ Drive in the center of the lane.
▷ Turn signal switched off.
▷ The sensor system calibration process is
complete.
▷ Cruise control with distance control active.
▷ Safety belt on the driver's side fastened.
▷ Approach control warning.
▷ Person warning.
▷ Side collision mitigation.
Switching on/off
Assisted Driving Mode
General information
This button is used to switch the config‐
ured function on and off.
The button can be used to set the pri‐
marily used function.
Set function
When the system is active, press the
button repeatedly until the desired func‐
tion is selected in the function bar. The function
bar for Assisted Driving mode is displayed at the
bottom of the instrument cluster.
Symbol Function
Cruise control with distance control.
Depending on the equipment ver‐
sion, cruise control with distance
control and steering and traffic jam
assistant.
The selected function is shown in green.
The setting is stored for the driver profile cur‐
rently used.
Switching on
1. Press the button on the steering
wheel.
2. Adjust the steering and traffic jam
assistant if necessary.
Steering wheel symbol lights up gray.
The system is on standby and does not
manipulate steering.
System activates automatically as soon as all
function conditions are fulfilled.
Steering wheel symbol lights up green.
The system is active.
With the system switched on, the person warn‐
ing with City braking function and the side colli‐
sion mitigation are active.
Switching off
Press the button on the steering wheel.
The indicator goes out.
The system does not perform supportive steer‐
ing wheel movements.
Seite 248
CONTROLS
Driver assistance systems
248
Online Edition for Part no. 01405A03663 - II/20