BMW X5 PLUG-IN HYBRID Owner'S Manual Download Page 54

Page: 54 / 432

Adjusting the volume

Turn the volume button during the spoken in‐
structions until the desired volume is set.

▷

The volume remains constant even if the vol‐
ume of other audio sources is changed.

▷

The volume is stored for the driver profile
currently used.

Using the voice activation

system of the smartphone

A smartphone connected to the vehicle can be
used via voice activation.
Activate voice command response on the smart‐
phone for this purpose.

Press and hold the button on the

steering wheel for approx. 3 seconds.
Voice command response is activated on the
smartphone.

Release the button.

If activation is successful, a confirmation ap‐
pears on the Control Display.

If it was not possible to activate voice command
response, the list of Bluetooth devices appears
on the Control Display.

Amazon Alexa Car Integration

Concept

Alexa is a digital voice-controlled assistant by
Amazon. With Amazon Alexa Car Integration,
Alexa can be used in the vehicle.

General information

Some of the Alexa functions are limited in the ve‐
hicle to prevent any impairment of safety while
driving.

Functional requirements

▷

Connected Voice Services purchased via
ConnectedDrive Store.

▷

Same ConnectedDrive account used in the
vehicle and in the BMW Connected app.

▷

Vehicle added in the BMW Connected app.

▷

Amazon account and BMW account are
linked in the BMW Connected app.

▷

Smartphone connected to the vehicle via
Bluetooth or USB.

Activation in the BMW Connected
app

The Amazon Alexa Car Integration is activated in
the BMW Connected app.
Follow the instructions in the app.

Activation in the vehicle

An authorization for the use of Amazon Alexa Car
Integration is required every time before starting
a trip.

Authorizing Amazon Alexa Car Integration:

▷

Connect the smartphone to the vehicle
via Bluetooth.

▷

Selects appropriate driver profile.
Driver profiles, refer to page

If necessary, press the button on the

steering wheel and wait for signal tone.

Say activation word ›Alexa‹ and desired com‐
mand.
Information about the active function is dis‐
played on the Control Display.

Malfunction

In case of a malfunction, switch off the engine
and start the engine again.

System limits

▷

Certain noises can be detected and may lead
to problems. Keep the doors, windows, and
glass sunroof closed.

▷

Noises from the front passenger or the rear
seat bench can impair the system. Avoid

Seite 54

CONTROLS

iDrive

Online Edition for Part no. 01405A03663 - II/20

Summary of Contents for X5 PLUG-IN HYBRID

















































































































































































































































































































































































































































Search results

Summary of Contents for X5 PLUG-IN HYBRID

Reviews:

Related manuals for X5 PLUG-IN HYBRID

Brands by name

Popular brands

BMW X5 PLUG-IN HYBRID, Owner'S Manual

Search results

Summary of Contents for X5 PLUG-IN HYBRID

Reviews:

Related manuals for X5 PLUG-IN HYBRID

Brands by name

Popular brands