BMW X5 PLUG-IN HYBRID, Owner'S Manual

Page: 297 / 432

Using the button
General information
When the vehicle is in standby state, the system
can be switched on or off via the automatic cli‐
mate control buttons.
Switching on
Press any button except:
▷ Rear window defroster.
▷ Lower air flow button side.
▷ Seat heating.
▷ Seat ventilation.
Switching off
Press and hold the bottom button.
The system switches off when the vehicle is ex‐
ited.
Via iDrive
The system can be switched on or off via iDrive.
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Preconditioning"
5. "Start now"
Via BMW display key
The system can be switched on or off via the
BMW display key.
Switching on
1. Switch on the display of the BMW display
key.
2. "Preconditioning setting"
3. Tap on the symbol.
4. "Activate now"
5. "Start"
Switching off
1. Switch on the display of the BMW display
key.
2. "Preconditioning setting"
3. Tap on the symbol.
4. "Stop"
Display
symbol on the automatic climate control indi‐
cates the system is switched on.
Climate control for departure
time
Concept
Different departure times can be set to ensure a
comfortable interior temperature in the vehicle at
the time of departure.
The activation time is automatically determined
based on the temperature.
Departure time with weekday: time and day of
the week can be set.
On the desired weekdays, the system will be
switched on promptly before the set departure
time.
Switch-off takes place automatically a few mi‐
nutes after the set departure time.
The departure time is preselected in two steps:
▷ Set departure times.
▷ Activate departure times.
A minimum of 10 minutes should pass between
setting/activating the departure time and the
planned departure time to allow a sufficient pe‐
riod of time for the climate control.
Setting the departure time
Via iDrive
1. "CAR"
2. "Settings"
3. "Climate control"
Seite 297
Climate control
CONTROLS
297
Online Edition for Part no. 01405A03663 - II/20