24
PRO 11 SERIES WIRELESS ETHERNET
Name
Description
Meaning
QLT
Quality of reception
H, M, and L LEDs not lit: Very-low-quality reception (less
than -81 dBm) or not synchronized with Access Point.
H and M LEDs not lit, L LED is lit: Low-quality reception
(from -81 to -77 dBm), usually enabling 1-Mbps traffic.
H LED not lit, M and L LEDs lit: Medium-quality
reception (from -77 to -65 dBm), usually enabling 2-
Mbps traffic.
H, M, and L LEDs lit: High-quality reception (greater
than -65 dBm), enabling 3-Mbps traffic.
2.6.2 A
CCESS
P
OINT
LED
S
Name
Description
Meaning
PWR
power supply
On – After successful power-up
Off – Power off
INFR
radio interference
Off – No interference
Blinking – Interference present
ETHR Ethernet activity
On – Reception of data from Ethernet LAN that is
forwarded to WLAN (in reject-unknown mode)
Off – No reception of data from Ethernet LAN that is
forwarded to WLAN
LOAD WLAN load
H, M, and L LEDs not lit: No stations.
(Number of
H and M LEDs not lit, L LED lit: 1 to 8 stations.
associated stations) H LED not lit, M and L LEDs lit: 9 to 16 stations.
H, M, and L LEDs lit: 17 or more stations.
2.6.3 V
ERIFYING THE
E
THERNET
C
ONNECTION
Once you have connected the unit to an Ethernet outlet, verify that the ETHR
LED on the front panel is blinking. The ETHR LED should blink whenever the
unit receives LAN traffic.
At the other end of the Ethernet link, verify that the LINK indicator is ON. On
Access Points, the LINK indicator is located on the attached hub port; on Station
Adapters, the LINK indicator is located on the NIC.
Summary of Contents for LW0050A
Page 2: ......
