OPERATING MODES
85
7.5 Systeminfo
System information can be read out over the serial interface in all four operating modes.
The location of the serial interface is shown below:
You can find the allocation of the serial interface under
Serial Interface
on page
116
. A
standard cable RJ45 on DB9 to a CPU is included in delivery.
For communication, please set up the format of the serial data communication to:
115,2K,8,1,NO
(115,2 KBAUD, 8 Data bit, 1 Stop bit, NO parity)
Control command
Use the following command in any operating mode to transfer the system information:
•
STX, 0x40, 0x80, ETX
Acknowledgement of the system info
Available Information
The following information is transferred:
Date : Fri July 27 14:04:00 2007
File : acx4000.hex
Serial Interface
(RS232)
Summary of Contents for ACX4000
