ACX4000
44
7x IN / 1x OUT
The signals of 7
sources can be
switched to one
display.
KVM- Switch 1/7 Single head:
Up to 7 CPUs (up to 49 with cascaded
application) can be operated from one console.
KVM- Switch 1/3 Dual head:
Up to 3 CPUs with Dual head graphic
card (up to 9 with cascaded application) can be operated from one
console.
Standard operating mode
Reset
the ACX4000- Switch to default settings (Factory Reset):
1.
switch power off
2.
set the DIP- switch
3.
switch power on, the device is resetting
4.
switch power off
5.
set the DIP- switch back
6.
switch power on - done
Operating Mode after Reset/ Power ON:
After reset, the respective
DEFAULT-mode is selected.
Operating Mode after Reset/ Power ON:
After reset, the previous
mode before reset or power off is selected.
Master
: In a cascaded application in KVM- switch mode, the device is
‘Master’– i.e. it is on highest level within the tree structure, seen from
the Remote Unit.
Slave
: In a cascaded application in KVM- switch mode, the device is
‘Slave’– i.e. it is on second level within the tree structure, seen from
the Remote Unit.
Summary of Contents for ACX4000
