OPERATING MODES
67
Setup
In ‘Single head- KVM- Switch’ operating mode the following setups are possible:
Master/Slave function
The device is Master (default status: it is either the exclusive device in
the system, or if ACX4000 KVM Switches are cascaded, it is on the
highest level (directly after the console).
The device is Slave: if ACX4000 KVM Switches are cascaded, it is on
second level (directly after the Local Units).
Operating mode after Reset/Power ON
After a reset, the DEFAULT- Mode is selected:
The console (Remote Unit) is switched to input 1 (Local Unit at
CPU1).
After reset, the previous mode before reset or power OFF is selected.
Summary of Contents for ACX4000
