OPERATING MODES
79
Operation
The following operations are possible in the ‘Dual head KVM- Switch’ operating mode:
a) By push-button:
The device switches to the next channel with each key press. The changeover will only be
executed if the push-button is not operated for longer than 2 seconds. With each key press,
the display will switch to the next channel indicated by a rapidly blinking LED. If the last
channel is reached, the device will switch to the first channel.
b) By serial interface
You can find the allocation of the serial interface under
Serial Interface
on page
116
. A
standard cable RJ45 on DB9 to a CPU is included in delivery.
For communication, please set up the format of the serial data communication to:
115,2K,8,1,NO
(115,2 KBAUD, 8 Data bit, 1 Stop bit, NO parity)
Push-Button
Serial Interface
(RS232)
Summary of Contents for ACX4000
