ACX4000
40
5. Diagnostic
5.1 ACX4000- Switch for CATx
Each ACX4000 SWITCH is fitted with two indicator LEDs:
Power
and
Link Status:
The
Power
LED is next to the Power socket. The
Link Status
LEDs are at the upper CATx-
connectors in the left and right upper corner. The LEDs in the left corners show the status for
the lower CATx- connectors, the right LEDs for the upper CATx- connectors.
The location of the LEDs is shown below:
Diagnostic- LEDs at ACX4000- Switch for CATx
LED Appearance
Diagnostics
Power LED
(Red LED)
Off
On
Device not ready
Device ready
Link Status
(Green / Orange
LED)
Off
Orange ON
Orange blinking
Green ON
Green blinking
No transmission over the CATx- cable, the
corresponding local/ remote unit is switched off or
broken interconnect cable
active connection, CATx cable is OK
Displaying the CPU port, pre-selected by the
pushbutton
The CPU, actually displayed on the Console is
online (CATx connection established)
The CPU, actually displayed on the Console is
offline (CATx connection is broken)
Diagnostic LED
Power
Diagnostic LED
Link Status
Lower connector
Diagnostic LED
Link Status
Upper connector
Summary of Contents for ACX4000
