INSTALLATION
23
3.3 System Setup
To install your ACX4000 Switch system:
1.
Switch off all devices.
2.
Connect your keyboard, monitor(s) and mouse to the Remote Unit (depending on device
type).
3.
Connect the CPU/signal source to the Local Unit using the supplied cable(s).
4.
Attach the connection cables (CATx- cable) between the ACX4000 switch and Local
Unit and between the ACX4000 switch and Remote Unit. Use for this either the
provided crossed CATx- cable or insert the provided crossed cable with the help of the
provided CATx- coupler before/after your CATx- wiring.
5.
Take the ACX4000 switch from the packing and also the sheet with the product stickers.
6.
According to your application, peel the corresponding sticker from the sheet and stick it
on the top panel:
7.
Use the associated stickers to label the interface ports:
Summary of Contents for ACX4000
