SERVICE SETUP
43
Operating Mode Selection
Operating Mode Selector
Operating Mode
Selector
Operating Mode
Multiplex- Repeater:
The signal(s) coming from the Local Unit is
(are) equalized (and distributed) and extended over further 140m.
An incoming DVI
(+audio) signal is
distributed and
extended on up to 7
outputs.
Two incoming DVI
(+audio) signals are
distributed and
extended each up to 3
outputs.
4 incoming DVI
(+audio) signals are
extended.
Cross point Switch
: Every port can either be an input (to a Local Unit)
or an output (to a Remote Unit). Each connection input/output is
possible.
1x IN / 7x OUT
The signals of one
source can be
switched to up to 7
displays.
2x IN / 6x OUT
The signals of 2
sources can be
switched to up to 6
displays.
3x IN / 5x OUT
The signals of 3
sources can be
switched to up to 5
displays.
4x IN / 4x OUT
The signals of 4
sources can be
switched to up to 4
displays.
5x IN / 3x OUT
The signals of 5
sources can be
switched to up to 3
displays.
6x IN / 2x OUT
The signals of 6
sources can be
switched to up to 2
displays.
Switch setting
Down
Switch setting
Up
Switch setting
Extraneous
Summary of Contents for ACX4000
