OPERATING MODES
75
7.4 Dual head KVM- Switch
From one console (2x monitor, keyboard and mouse), you can remotely control up to 3 CPUs.
The distances between the CPU and ACX4000 Switch and between ACX4000 Switch and
console may amount in each case to up to 140m.
The switching between the CPUs can be carried out from the attached keyboard, push-button
at the device, or over the serial interface.
You can cascade ACX4000 KVM- Switches in two stages for all applications allowing up to
9 dual head CPUs to be addressed.
In addition to the DVI- signals and USB for keyboard/mouse, bi-directional stereo-audio +
serial (RS232/V24) can be transferred by the choice of appropriate Local/ Remote Units.
Configuration of ‘Dual head KVM- Switch’
Push-button; for the
sequential selection of
the connected CPUs
Connect to the ACX4000-
KVM Local Units (CPU) –
Video 1 + k/m
Connect to the ACX4000-
KVM Remote Units
(Console) – Video 1 + k/m
L
A2
L
B1
L
A1
L
B2
R
B
R
A
L
B3
L
A3
Connect to 5V power
supply
Connect to the ACX4000-
KVM Local Units (Console) –
Video 2 + k/m
Connect to the ACX4000-
KVM Local Units (CPU) –
Video 2 + k/m
Summary of Contents for ACX4000
