INSTALLATION, OPERATION AND MAINTENANCE MANUAL
BiSolid Saver OM-BSSV00/08/2012/EN
30
Figure 11. Positioning of the ash-tray and fire-grates for the boilers BiSolid Saver
С
and
BiSolid Saver
А
, when utilizing wood pellets (top view).
Warning
When boilers from series BiSolid Saver
С
and BiSolid Saver
А
operate with
wood pellets, the front fire-grate must be always lifted up, while the rear fire-
grate must be down. The ash-tray must be positioned with its lower side
towards the pellet burner.
When operating boilers from series BiSolid Saver A with wood logs, the consumers use the
constantly installed pellet burner from series BiSolid GP for initial firing of the wood logs,
placed in the boiler’s hoper. In this case the burner must operate without changing the position
of fire-grates in the combustion chamber. After the wood logs ignition the pellet burner must be
switched off manually.
Fugure 12 represents the positioning of the ash-tray and fire-grates when operating with wood
logs, for boilers from series BiSolid Saver A equipped with constantly installed pellet burner.
Ash tray
position
Rear fire-grate
position
Front fire-grate
position