background image

Supplied By www.heating spares.co  Tel. 0161 620 6677

users guide

Classic

Your Ideal users guide

FF 330 - 3 100

FF 340 - 360 LF

ENGINEERED FOR PEACE OF MIND

When replacing a part on this appliance, use only spare parts that you can be assured

conform to the safety and performance specification that we require. Do not use

reconditioned or copy parts that have not been clearly authorised by Ideal Boilers.

Summary of Contents for Classic FF 360

Page 1: ...330 3 100 FF 340 360 LF ENGINEERED FOR PEACE OF MIND When replacing a part on this appliance use only spare parts that you can be assured conform to the safety and performance specification that we require Do not use reconditioned or copy parts that have not been clearly authorised by Ideal Boilers ...

Page 2: ...he user after installation Important notes a This appliance must not be operated without the casing correctly fitted and forming an adequate seal b If the boiler is installed in a compartment then the compartment MUST NOT be used for storage purposes c The ventilation provided for the boiler during installation MUST NOT be blocked and a check should be made periodically that the ventilation areas ...

Page 3: ...at settings are 2 For longer periods Turn the boiler ON OFF switch C to OFF Switch the electricity supply to OFF To relight the boiler Repeat the procedure 1 8 detailed in To light the boiler Frost protection If no frost protection is provided and frost is likely during a short absence from home leave the heating controls at a reduced temperature setting For longer periods the entire system should...

Page 4: ...esigned for use with Natural Gas only They have been tested and conform with the provisions of BS 6332 and BS 5258 CERTIFIED PRODUCT Manufactured under a BS EN ISO 9001 1994 Quality System accepted by BSI Natural Gas appliances are service listed by British Gas person Loss of system water pressure Boilers fitted with Classic Sealed System Units only If the red arrow on the unit pressure gauge is s...

Reviews: