Bionics TX-2300KFP, Manual To Installation And Operation

Page: 19 / 40

TX-KFP
Bionics Instrument
© 2004 Eur 20040426, all rights reserved
- 19 -
3. Installation
3.2.1 Wall- or ceiling-mounting of the gas detection unit
- Wall mounting:
For wall-mount installation there are two options.
Option 1: Using the “Clip-in” wall mount set (optional item)
Option 2: Using the KFP-Wall/Ceiling mount adapter (optional item)
Option 1 (“Clip-in” wall mount set SH-40):
The set consists of two parts:
1 - Mounting plate, see fig. 3.2.2b
2 - Support ring, see fig. 3.2.2a
If not fitted already, fit the support ring with M4 bolts to the mounting plate.
Drill holes at the required distances (for details see fig. 3.2.2b) and fit the mounting plate with
M6 bolts or equally sized screws to the wall. Place the unit into the support ring, see fig. 3.2.2c.
Fig. 3.2.2b
Fig. 3.2.2a
Fig. 3.2.2c