Bionics TX-2300KFP, Manual To Installation And Operation

Page: 20 / 40

TX-KFP
Bionics Instrument
© 2004 Eur 20040426, all rights reserved
- 20 -
Fig. 3.2.3
Fig. 3.2.4
3. Installation
3.2.1 Wall- or ceiling-mounting of the gas detection unit (Cont’d)
Option 2 (KFP Wall/Ceiling mount adapter, WM-40/CM-40):
The WM-40/CM-40 holder assembly can be either wall or ceiling mounted and is suitable for
all type gas sensors (BP/DP/ELP and MP).
The position of the cable entry can be adapted as such that it suits both mounting situations
(see section 1.5 for possible options).
To install the holder (see fig. 3.2.5), unscrew the
bottom part (items 5 and 7) from the top part
(item 4) and firstly install the mounting bracket
incl. the top part of the holder either to the wall or
ceiling.
For drilling dimensions ceiling mounting plate see
fig. 3.2.3
For drilling dimensions wall mounting plate see
fig. 3.2.4
Note:
Use M4 countersunk bolts to mount the holder top
cover to the mounting plate.
Use M6 bolts or equally sized screws to install the
mounting plate to the ceiling or wall.