Bionics TX-2300KFP, Manual To Installation And Operation

Page: 37 / 40

TX-KFP
Bionics Instrument
© 2004 Eur 20040426, all rights reserved
- 37 -
Appendix 3 - Transportation
If the TX-KFP unit has to be transported, please take the following precautions:
Remove the gas sensor from the TX-KFP unit.
Wrap the TX-KFP unit in proper padding.
Re-fit the following items onto the gas sensor:
- Blind plug (in the electrolyte supply opening, see fig. 5.1.12)
- Attach the BIAS voltage provision, type depends on TG no.
(see fig. 3.1.1 / 3.1.2 for details)
All the above materials were supplied with the original delivery of the sampler unit.
Pack the gas sensor separately in a properly sealed plastic bag.
For additional advice, please contact one of our Bionics Instrument offices
1
)
.
1)
For Bionics Instrument Offices see Appendix 4