Bionics TX-2300KFP, Manual To Installation And Operation

Page: 12 / 40

TX-KFP
Bionics Instrument
© 2004 Eur 20040426, all rights reserved
- 12 -
1: Introduction
1.5 Product options (Cont’d)
- Duct mounting set:
To duct mount the TX-KFP the following set of materials is available (see fig. 3.3.2):
Item Description
1
KF-40 nozzle 90 mm
2 KF-40 clamp
3 Gasket (Centring ring + O-ring)
- Calibration materials:
A complete calibration kit containing all necessary calibration aids can be ordered
(see appendix – 2 for a detailed description of the calibration kit).
1.6 Safety
This gas detection system has been designed to provide long-term reliable performance.
Nevertheless, we advise you to take the following basic precautions whilst installing
operating and maintaining this device.
ƒ
Read this “Guide to Installation and Operation” carefully.
ƒ
Be sure to file this guide for future reference.
ƒ
Installation, maintenance, calibration and testing should be carried out
by qualified personnel only.
ƒ
Check if the power supply matches the specifications given in this guide and
ensure that the system has been connected properly.
ƒ
If you have any doubt with regard to the power supply, please contact one of the
Bionics Instrument Offices
1 )
.
ƒ
If there are any signs of system damage or malfunctioning, please switch
the alarm/control unit to ‘Stand-by mode’ and contact one of the Bionics
Instrument Offices
1
)
.
1)
For Bionics Instrument Offices see Appendix 4