Billion BiPAC 8700VAX(L)-1600, User Manual

Page: 228 / 327

223
Click
Add
to create IPSec connections.
IPSec Settings
L2TP over IPSec:
Select Enable if user wants to use L2TP over IPSec. See L2TPover IPSec
Connection Name:
A given name for the connection, but it should contain no spaces (e.g.
“connection-to-office”).
WAN Interface:
Select the set used interface for the IPSec connection, when you select adsl
pppoe_0_0_35/ppp0.1 interface, the IPSec tunnel would transmit data via this interface to connect to
the remote peer.
IP Version:
Select the IP version base on your network framework.
Local Network:
Set the IP address or subnet of the local network.
L
Single Address:
The IP address of the local host, for establishing an IPSec
connection between a security gateway and a host (
network-to-host
).
L
Subnet:
The subnet of the local network, for establishing an IPSec tunnel between a
pair of security gateways (
network-to-network
)
IP Address:
The local network address.
Netmask
: The local network netmask.
Remote Secure Gateway:
The IP address of the remote VPN device that is connected and
establishes a VPN tunnel.
Anonymous:
Enable any IP to connect in.
Remote Network:
Set the IP address or subnet of the remote network.
L
Single Address:
The IP address of the local host, for establishing an IPSec
connection between a security gateway and a host (
network-to-host
). If the remote
peer is a host, select Single Address.
L
Subnet:
The subnet of the local network, for establishing an IPSec tunnel between a
pair of security gateways (
network-to-network
), If the remote peer is a network, select
Subnet.