Home
/
Billion
/
BiPAC 8700VAX(L)-1600
/
User Manual

Billion BiPAC 8700VAX(L)-1600, User Manual, Page: 151 / 327

Share

Page: 151 / 327

Billion BiPAC 8700VAX(L)-1600 User Manual Download Page 151

146

IP over Ethernet

Description:

User-defined description for the connection, commonly for friendly use.

802.1P Priority:

The parameter indicates the frame priority level from 0 (lowest) to 7 (highest), which

can be used to prioritize different classes of traffic (voice, video, data, etc). Enter the priority
identification, tagged: 0-1, untagged: -1.

802.1Q VLAN ID:

It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN ID

identification, tagged: 0-4094, untagged : -1.

Here two modes are supported for users to deal with the IP and DNS. You can select obtain
automatically or manually input the information according to your ISP.

Obtain an IP address automatically:

Check whether to enable this function.

Option 60 Vendor ID:

Enter the associated information by your ISP. This option is used by DHCP

clients to optionally identify the vendor type and configuration of a DHCP client. The information is a
string of n octets, interpreted by servers. Vendors may choose to define specific vendor class
identifiers to convey particular configuration or other identification information about a client.

Option 77 User ID:

Set the User ID, which identifies the request DHCP user.

Option 61 Client ID:

Set the client ID., which identifies the request DHCP client.

Option 125:

Option 125 is a complementary standard of DHCP protocol, it is used to encapsulate

option 125 message into DHCP offer packet before forward it to clients. After the clients receive the
packet, it check the option 125 field in the packet with the prestored message, if it is matched, then
the client accepts this offer, otherwise it will be abandoned. Check Enable or Disable this function.

«
...
149
150
151
152
153
...
»

Summary of Contents for BiPAC 8700VAX(L)-1600








































































































































































































































































































































Reviews:

No comments