Billion BiPAC 8700VAX(L)-1600 User Manual Download Page 138

Page: 138 / 327

133

Click

Next

to continue to set the default gateway and DNS for IPv4 and IPv6.

Default Gateway

Select default gateway for you connection (IPv4 and IPv6).

DNS

IPv4

Three ways to set an IPv4 DNS server

Available WAN interfaces:

Select a desirable WAN interface as the IPv4 DNS server.

Static DNS Address:

To specify DNS server manually by entering your primary and

secondary DNS server addresses.

Parental Controls:

If user registers and gets a DNS account in the parental control provider

website, expecting to enjoy a more reliable and safer internet surfing environment, please
select this option (need to configure at

Parental Control Provider

IPv6

Obtain IPv6 DNS info from a WAN interface

WAN Interface selected:

Select one configured IPv6 WAN connection from the menu to be as an

IPv6 DNS.

Static DNS IPv6 Address

Primary IPv6 DNS Server / Secondary IPv6 DNS Server:

Type the specific primary and secondary

IPv6 DNS Server address.

Summary of Contents for BiPAC 8700VAX(L)-1600








































































































































































































































































































































Search results

Summary of Contents for BiPAC 8700VAX(L)-1600

Reviews:

Billion BiPAC 8700VAX(L)-1600, User Manual, Page: 138 / 327

Search results

Summary of Contents for BiPAC 8700VAX(L)-1600

Reviews: