Billion BiPAC 6200WZL R2 User Manual Download Page 7

Page: 7 / 157

Available and Resilience

• Dual-WAN ports (3G & Ethernet WAN)

• Load balancing - Maximizing bandwidth of outbound traffic*4

• Auto fail-over/fail-back

3G / HSPA

• Supports third generation (3G / 3.5G / 3.75G) digital cellular standards

• Peak downlink speeds up to 14.4Mbps and peak uplink speeds up to 5.76Mbps

• Supports multi-band UMTS (HSPA): 800, 850, 900, 1900, 2100 MHz, and AWS(1700/2100

MHz)

• Receive equalizer with antenna diversity on the 800, 850, 900, 1900, 2100 MHz, and

AWS(1700/2100 MHz) bands

• Supports quad band EDGE / GPRS / GSM: 850 / 900 / 1800 / 1900MHz

• Web-based GUI for 3G configuration and 3G Management Center

Network Protocols and Features

• NAT, static routing and RIP-1 / 2

• NAT supports PAT and multimedia applications

• Transparent bridging

• Virtual server and DMZ

• SNTP, DNS relay and DDNS

• IGMP snooping and IGMP proxy

• File sharing with SMB (Samba) / CIFS

Firewall Management

• Built-in NAT Firewall

• Stateful Packet Inspection (SPI)

• Prevents DoS attacks including Land Attack, Ping of Death, etc.

Summary of Contents for BiPAC 6200WZL R2






























































































































































Search results

Summary of Contents for BiPAC 6200WZL R2

Reviews:

Related manuals for BiPAC 6200WZL R2

Brands by name

Popular brands

Billion BiPAC 6200WZL R2, User Manual

Search results

Summary of Contents for BiPAC 6200WZL R2

Reviews:

Related manuals for BiPAC 6200WZL R2

Brands by name

Popular brands