Billion BiGuard 30, User Manual

Page: 140 / 211

140
the device will automatically logout User A.
SNMP Access Control
SNMP Function:
Select
Enable
to activate this function,
Disable
to deactivate this
function.
SNMP V1 and V2
Read Community:
Input the string for Read community to match your SNMP
software.
Write Community:
Input the string for Write community to match your SNMP
software.
Trap Community:
Input the string for Trap community to match your SNMP
software.
IP Address:
Input the device IP address with SNMP software installed.
SNMP V3
Username:
Input the Username for your SNMP software.
Password:
Input the Password for your SNMP software
.
Access Right:
Select Read to allow your SNMP software to read the information.
Select Read/Write
to allow your SNMP software to read and write the information.
4.5 Save Configuration To Flash
After changing the router’s configuration settings, you must save all of the
configuration parameters to flash memory to avoid them being lost after turning off
or resetting your router. Click
Apply to write your new configuration to flash
memory.