NOZ2 M
ANUAL
S
ERVICE
Manual version 6.0 - North America (10-03-2017)
en-75
en
6. The fan is attached to the cabinet via a frame (three brack-
ets and a ‘fan seat’). Loosen the three bolts
5
which attach
this frame to the cabinet.
Caution:
c
The fan is heavy, and will fall if you unfasten these
bolts. Take firm hold of the fan.
7. The fan is attached to the frame with four bolts
6
. Loosen
the bolts.
8. The base plate is attached to the cabinet with 16 (NOZ
2
25) or 20 (NOZ
2
50) screws. Loosen these screws
7
and
remove the base plate.
9. Mount the whole thing in reverse order to the disman-
tling. If necessary, extend the mains power cable.
See also:
"Replacing the isolation switch" on page 1
7.2
Electronics module
Only for units which have automatic
CHIPS
control
The unit contains one electronics module. Depending on the
version, one can find on this such things as:
• the transformers;
• the control circuit board;
• the connector plate;
• the fuses.
• the filters
• the reactor
