O
PERATION
WITH
B
-
TOUCH
A
IR
HEATER
en-54
en
4.5
Settings
The Settings menu allows you to enter settings which influ-
ence the day-to-day use of the unit.
1. Select modes
The control panel has an automatic mode and a manual mode.
With the function Select modes, you can set which of these
modes can be selected in the HOME screen.
5. Room temperature
Here, set the temperature which is to be used by default as
the room temperature when starting up the unit.
The desired room temperature can temporarily be adjusted
on the home screen until the next start-up moment.
6. Minimum air temperature
Set the minimum difference between the room temperature
and the discharge temperature.
This difference can be increased for more comfort. A smaller
difference saves energy.
8. Night temperature
The night temperature is used when the unit is switched off.
When the room temperature drops below this set value, the
unit will start working in order to keep the room at the night
temperature.
Note:
n
This function only operates when the heating is
switched on.
Warning:
w
Be aware that the airflow of the unit can set
objects in motion. This might set off an alarm
system in the building at night time.
9. Calibration
An unfavourable positioning of the room sensor or use of the
temperature sensor in the unit may be the reason why the dis-
played temperature deviates from the actual temperature.
Use this function to adjust the temperature reading.
