VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 49 of 88
4.9.1 Multiplexer User Access Settings
‘Multiplexer User Access Settings’ assigns permission to each user who is allowed to control
the selected multiplexer.
This is the same list as is configured by the ‘User Multiplexer Access Settings’ screen (see
page 75), but arranged by multiplexer number rather than user number.
Figure 48 Multiplexer User Access Settings Screenshot
•
Use the
Multiplexer
selector (bottom right) to select the one to configure.
•
Tick the box adjacent to each user on the system who will be allowed to control the
multiplexer.
•
Select None
: will untick all of the boxes simultaneously.
•
Select All
: will tick all of the boxes simultaneously.
•
Copy Previous
: will duplicate the list from the previous multiplexer number into this list, if
the list needs to be the same.
•
Accept
: will save the settings for the current page.
•
Restore
: will return all of the settings for the current page to the point when the
configuration was last saved using
Accept
.
•
Default
: will restore the settings to valid default values for the current page.
