VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 14 of 88
Figure 11 Transfer Menu
Use the ‘Configuration’ ‘Send’ and ‘Receive’ commands to send or receive a file to or from
the system.
3.3.1 Transfer Configuration Send Command
Shortcut keys:
Alt-TCS
Toolbar:
‘Send’ is used to transfer the content of a configuration file to the Visilynx 3 system. Prior to
sending, a warning is given to remind the user that the existing configuration in the Visilynx 3
system will be overwritten.
Figure 12 Configuration Warning Message
If File New has been done and no changes have been made to the configuration, the status
bar will show ‘Defaults’. Sending this configuration will replace the factory default data in the
Visilynx 3 system. An additional warning message is given before this process starts.
Figure 13 Visilynx Defaults Warning Message
After the above warning(s) the communication process is performed.
