VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 52 of 88
4.10.1 Node Alarm Keyboard Access Settings
‘Node Alarm Keyboard Access Settings’ assigns permission to each keyboard that is allowed
to manage and view alarms on the selected network node.
A Visilynx 3 system can consist of up to 127 separate nodes. Each node can generate up to
1701 alarms. Not all users on other nodes will need to have access to these alarms. In the
example shown above, all 32 keyboards have been granted access to the alarms from Node
127.
This is the same list as is configured by the ‘Keyboard Node Alarm Access Settings’ screen
(see page 37), but arranged by node number rather than keyboard number.
Figure 50 Node Alarm Keyboard Access Settings Screenshot
•
Use the
Node
selector (bottom right) to select the one to configure.
•
Tick the box adjacent to each keyboard on the system that will be allowed to control the
multiplexer.
If two users call up the same node and both have been granted access to it,
the user priority rating will determine who gains control of the alarm situation (see page
71).
•
Select None
: will untick all of the boxes simultaneously.
•
Select All
: will tick all of the boxes simultaneously.
•
Copy Previous
: will duplicate the list from the previous node number into this list, if the
list needs to be the same.
•
Accept
: will save the settings for the current page.
•
Restore
: will return all of the settings for the current page to the point when the
configuration was last saved using
Accept
.
