VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 56 of 88
4.12.1 Quad Card Keyboard Access Settings
‘Quad Card Keyboard Access Settings’ assigns permission to each keyboard that is allowed
to control the selected quad card. Reference should be made to an installation plan to
establish a logical approach for keyboard access, e.g. units near to the user workstation.
This is the same list as is configured by the ‘Keyboard Quad Card Access Settings’ screen
(see page 37), but arranged by quad card number rather than keyboard number.
Figure 53 Quad Card Keyboard Access Settings Screenshot
•
Use the
Quad card
selector (bottom right) to select the one to configure.
•
Tick the box adjacent to each keyboard on the system that will be allowed to control the
quad card.
•
Select None
: will untick all of the boxes simultaneously.
•
Select All
: will tick all of the boxes simultaneously.
•
Copy Previous
: will duplicate the list from the previous quad number into this list, if the
list needs to be the same.
•
Accept
: will save the settings for the current page.
•
Restore
: will return all of the settings for the current page to the point when the
configuration was last saved using
Accept
.
•
Default
: will restore the settings to valid default values for the current page.
