VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 76 of 88
4.18.5 User Quad Access Settings
‘User Quad Card Access Settings’ assigns to the selected user permission to control each
quad card.
This is the same list as is configured by the ‘Quad Card User Access Settings’ screen (see
page 57), but arranged by user number rather than quad card number.
Figure 69 User Quad Access Settings Screenshot
•
Use the
User
selector (bottom right) to select the one to configure.
•
Tick the box adjacent to each quad card on the system that the user will be allowed to
control.
•
Select None
: will untick all of the boxes simultaneously.
•
Select All
: will tick all of the boxes simultaneously.
•
Copy Previous
: will duplicate the list from the previous user number into this list, if the
list needs to be the same.
•
Accept
: will save the settings for the current page.
•
Restore
: will return all of the settings for the current page to the point when the
configuration was last saved using
Accept
.
•
Default
: will restore the settings to valid default values for the current page.
