VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 15 of 88
3.3.2 Transfer Configuration Receive Command
Shortcut keys:
Alt-TCR
Toolbar:
‘Receive’ is used to collect a configuration from the Visilynx 3 system, for backup purposes.
It is highly recommended that the received configuration should be saved to disk before
making any changes.
3.3.3 Transfer Software… Command
A warning is given to remind you that any configuration in the system will be erased during
software transfer.
Figure 14 Software Warning Message
Note: If you do not have a copy of the last configuration transferred to the Visilynx 3 system,
or if it has been changed by keyboard users since being transferred (sequences, views or
zones may have been changed), then you should first transfer the configuration from Visilynx
3. You can then transfer it back again after the new software is loaded.
Figure 15 Open Software File Dialog Box
