VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 53 of 88
•
Default
: will restore the settings to valid default values for the current page.
4.11 Node Trunk Settings
‘Node Trunk Settings’ allows you to configure the camera inputs and monitor outputs that
form the trunks that connect nodes.
Figure 51 Node Trunk Settings Screenshot
•
Use the
Node trunk
selector (bottom right) to select the one to configure.
•
Neighbour Node End
: provides a cross-reference to the selected trunk as seen from the
node to which it is connected.
Node
is the address of that node, and
Trunk
is the
number of the same trunk at that node (this is necessary because the selected trunk may
not have the same number on both the local and the neighbour nodes).
•
Local Node End
: defines whether the trunk is an
Input
or an
Output
with respect to this
node and what the corresponding input
Camera
or the output
Monitor
is.
•
Accept
: will save the settings for the current page.
•
Restore
: will return all of the settings for the current page to the point when the
configuration was last saved using
Accept
.
•
Default
: will restore the settings to valid default values for the current page.
