manualshive.com logo in svg

Bettcher Quantum Flex Air 1000, Operating Instructions & Parts List Manual, Page: 8 / 177

Share
Download
Bettcher Quantum Flex Air 1000 Operating Instructions & Parts List Manual Download Page 8

 

 Safety and Ergonomics 

 

1-4 

 Safety and Ergonomics  
 Quantum Flex

®

 Air Operating Instructions and Parts List 

Manual No. 107193   
November 1, 2018 

 

Safety Recommendations and Warnings 

 
Quantum Flex

®

 Air Trimmers are used for removal of fat and tissue, the recovery of lean meat 

from bone, and as a universal cutting tool in industry.  Any use in applications other than those 
for which the trimmer was designed and built may result in serious injuries. 
 
 

 

 

The manufacturer assumes no liability for any 
unauthorized design changes, modification, or use of 
parts not supplied by the manufacturer. 
 
The use of parts not designed for use on that specific 
model, including changes in operating procedures 
made by the owner or any of his personnel.   
 
The use of parts other than those listed in the parts 
list for the specific model may cause blade lock-up 
resulting in an unsafe operating condition. 

 

 

Sharp blades may cause injury! 

 

 

 

 

 
 

 
 
 

 

WARNING

WARNING

COMPANY 

CONFIDENTIAL

Summary of Contents for Quantum Flex Air 1000


















































































































































































Reviews:

No comments