Beta Max MAXIAL TRACK HOIST, Use And Maintenance Instruction Manual

Page: 95 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
MAINTENANCE AND REPAIR
Page | 10-4
10.2.2 General maintenance (Monthly)
In addition to the controls concerning the daily maintenance, perform the additional
maintenance described below:
—
check to ensure all Kwik bolts are tightened securing the Ladder Track sections to one
another and the base feet
—
check to ensure all Scaff-clamps are tightened securing the Ladder Track to scaffolding
—
verify that the pulley located in the Sliding Head moves freely
—
verify that the Overweight system is calibrated properly
The General Maintenance (Monthly) checklist form is located in appendix F of this manual.
10.2.3 General maintenance (Annually)
In addition to the controls concerning the daily maintenance, perform the additional
maintenance described below:
—
inspect the transmission gears by a certified Beta Max technican for any signs of
missing or broken gear teeth
—
inspect wear and tear/usage of the transmission gears by a certified Beta Max
technician
—
replace transmission seals by certified Beta Max technician
—
inspect transmission bearings by certified Beta Max technician
—
clean and re-lubricate the transmission
The General Maintenance (Annually) checklist form is located in appendix G of this manual.
DANGER
The yearly maintenance on the Maxial Track Hoist transmission must be
performed by a factory trained certified Beta Max technican.