Beta Max MAXIAL TRACK HOIST, Use And Maintenance Instruction Manual

Page: 85 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
PREPARATION FOR MACHINE USE
Page | 8-2
DANGER:
When failure occurs during machine operation, take the necessary steps to
resolve this before utilizing the machine again.
DANGER:
It is strictly forbidden to suspend any equipment or material from the machine's
lifting structure.
ATTENTION:
A safety inspection must be carried out every day before operating the
machine.
8.2 SAFETY REQUIREMENTS DURING MACHINE OPERATION
In order to work safely, always remember the following requirements during machine
operation:
— it is strictly forbidden to construct work levels which are higher than the loading unit
— the Carrier Basket is to be brought down to ground level, as soon as possible, in every
instance and any kind of failure
— at the end of each working day, the Carrier Basket must be brought down to its lowest
position and the power supply must be disconnected, storing the power cable
separately, in a safe place.
8.3 SAFETY VERIFICATION INSTRUCTIONS
The Technicians, who are responsible for the machine’s start up and maintenance, are to
refer to the instructions given below in order to verify the functionality of the installed safety
devices and to ensure that all parts of the machine work perfectly well.
8.3.1 General verification of the machine
In order to ensure that the machine’s mechanical components are working perfectly well,
proceed as described below:
— in case of a storm, tornado, hurricane or earthquake, all essential parts of the machine
must be checked by a professional or an authorized inspector, before putting the
machine back into operation
— if the machine is installed outdoors, it must not be used if the wind speed exceeds 35
mph
— if the machine is exposed to frost, remove this before operating the machine
ensure
that no equipment or material is suspended from the machine’s structure