Beta Max MAXIAL TRACK HOIST, Use And Maintenance Instruction Manual

Page: 90 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
TROUBLESHOOTING
Page | 9-1
9. TROUBLESHOOTING
9.1 THE MACHINE DOES NOT START
If the machine does not start-up, the operator responsible for its maintenance must:
— ensure that the main power supply to the machine has not been interupted
— ensure that the EMERGENCY pushbutton not pressed
— ensure that the
Slack Rope Assembly is not engaged
— ensure that the Overweight System is not engaged
— ensure that the safety brake device is not intervened
9.2 TROUBLESHOOTING GUIDES
Troubleshooting operations of the electrical system will be carried out with the supply voltage
disconnected but some troubleshooting will require the supply voltage to be connected.
Only authorized personnel are to carry out any troubleshooting on the Maxial Track Hoist.
The troubleshooting guides are a step-by-step guide with a question being asked and the
answer to the question sending the reader to the next apporpiate step to check.
— The Maxial cUL Track Hoist 110 version troubleshooting guide is located in appendix
C of this manual.
— The Maxial cUL Track Hoist 220 version troubleshooting guide is located in appendix
D of this manual.