Beta Max MAXIAL TRACK HOIST, Use And Maintenance Instruction Manual

Page: 55 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
INSTALLATION
Page | 5-6
Figure 5.9
10. Stack the track section with the Sliding
Head vertically onto the track section
securely fastened to the scaffolding. Align
the holes that are in the tongue with the
holes in the channel.
11. Secure the track to the horizontal
scaffolding with two Scaff-clamps on the
sides of the track.
12. Fasten the two track sections together
with a Kwik bolt in each side. When
installing the Kwik bolt there is no need to
remove the wing nut and washer. Push
the Kwik bolt through and turn 90 degrees.
Tighten wing nut.
Figure 5.10
Figure 5.11