Beta Max MAXIAL TRACK HOIST, Use And Maintenance Instruction Manual

Page: 100 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
MAINTENANCE AND REPAIR
Page | 10-9
Figure 10.3
10.3.5 Transmission and drum
The Maxial Track Hoist transmission is a grease filled gearbox. It contains steel gears
incased in a cast aluminum housing. The transmission seals should be inspected routinely,
externally of the transmission for any leaks as the grease begins to breakdown. Once a year
the transmission is to be opened and inspected by a factory trained certified Beta Max
technician.
10.3.5.1 Transmission annual inspection
1. Remove old grease and clean all components internal of the transmission
2. Inspect the gears for any signs of missing or broken teeth
—
If the teeth are worn down beyond 1mm, the gear is to be replaced.
3. Replace all transmission seals
4. Inspect the bearings and replace any worn bearings as needed
5. Re-lubricate the transmission using Exxon Beacon EP2 or equivalent
DANGER
The yearly maintenance on the Maxial Track Hoist transmission must be
performed by a factory trained certified Beta Max technican.