Beta Max MAXIAL TRACK HOIST, Use And Maintenance Instruction Manual

Page: 57 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
INSTALLATION
Page | 5-8
15. Set the hoist Motor Pack in front of the base section with the wire rope on the
drum facing out to the Universal Carriage side of the track. Set the bottom of
the Motor Pack on the second rung from the ground. Slide the Motor Pack in
towards the back of the track, twisting and locking the bottom and top rung latch.
16. Attach the Control/Electrical Box to a horizontal member of the scaffolding, so the
box will be in view of the person operating the hoist.
17. Connect the motor cable from the Control/Electrical Box to the Motor Pack.
18. Connect the Handheld Control Pendant to the Control/Electrical Box.
19. Connect the power plug from the Control/Electrical Box to the correct power
source (110Vac-1ph-30A or 220Vac-1ph-20A) using no smaller than 10/3 power
cord extensions.
20. Press the DOWN button on the H andheld Control Pendant with one hand
and grasp the end of the w i r e r o p e cable with the other hand, constantly
pulling against the slack rope roller assembly. While pressing the DOWN button
on the Handheld C ontrol Pendant, walk backwards away from the hoist about
20ft (6.096 m).
21. Keeping a tight pull on the wire rope from the drum, pass the end of the wire
ro pe cab le to a person at the Sliding H ead section.
Figure 5.13