LB 571 BTwave
6 Start up and Calibration
68847BA2 Rev.00, 10/2020
23
6.
Click Maintenance button.
7.
A Login to maintenance pop-up window appears.
8.
Login by typing the Password: pass1 and click OK.
9.
Open Parameters/Windows tab. See Figure 8 below.
Figure 12 Windows Parameters
10.
Change COM port to
Windows parameters
0# (Address)
as found on Device
Manager. When value is changed
text goes RED
11.
Accept new value by clicking
Enter
button on PC and value turns YELLOW
12.
Finally click
Save to PC
button
13.
Restart UI and you should be connected. See Figure 9 for successful connec-
tion (Figure 8 shows an unsuccessful connection)
Figure 13 UI successful connection
The following information of the device is shown on Figure 14:
SW=MCU firmware version, HW=hardware version, (480023) = serial number
Summary of Contents for BTwave LB 571-02
