LB 571 BTwave
6 Start up and Calibration
68847BA2 Rev.00, 10/2020
21
6
Start up and Calibration
When resonator is powered up (24VDC/10A) and USB/RS422 adapter is connected
to the PC, device can be operated by using the UI software.
6.1
UI folder structure
Figure 8 UI folder structure
Meaning of the above folders are as follows:
Bin:
Executable UI and a General log-file.
Calibration:
Sample files (*.OLC) stored on PC.
CalibrationArchive:
Not used.
Calibset:
Calibrations stored on PC (*.XML).
Diagnostics:
Measurement data –files stored on PC.
Firmwares:
MCU firmware release.
FromFlash:
Stored sample (calib-xx.CSV) and online data (online-
xx.CSV) files, which have been downloaded from SD-card us-
ing the UI.
Settings:
Windows, device and recipe setting-files (parameters)
stored on PC.
More detailed information about these further in this document.
Summary of Contents for BTwave LB 571-02
