4 Installation
LB 571 BTwave
14
68847BA2 Rev.00, 10/2020
4.4
Mounting of the System
The system can be mounted at a conveyor belt, in a screw conveyor or in a gliding
carriage (3.3 Measurement arrangements).
NOTE
Please note the installation conditions of the respective measuring arrange-
ment, see 3.3 Measurement arrangements
Observe the permissible ambient conditions in chapter 9 Technical Infor-
mation.
The device must be installed weatherproof.
The device must not be entered, used as a climbing aid or used for any
other purpose (storage, fixing point).
IMPORTANT
The device must be mounted flat on the surface of the mounting device /
flange.
The operator is responsible for selecting the connection elements, and
tightening torque.
It is recommended to turn the device so that the cable screws point down-
wards.
1
2
Adjustable ring holder
Fixing screw M6x25
Figure 5 Mounting LB 571
Summary of Contents for BTwave LB 571-02
