Bernina Record 830, Manual

Page: 2 / 212

2
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
To reduce the risk of burns, fire, electric shock or injury to
persons:
Use this sewing-/embroidery computer only for its 1
intended use as outlined in this manual. Use only
attachments, accessories and parts recommended
by the manufacturer.
Do not use the sewing-/embroidery computer as a
2
toy. Caution is advised when the sewing-/embroidery
computer is used by children, or near children. The
sewing-/embroidery computer is not intended for use
by persons (including children) with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge, unless they have been
given supervision or instruction concerning use of
the sewing -/embroidery computer by a person
responsible for their safety. To ensure children do
not play with the sewing-/embroidery computer they
must be supervised.
Never operate this sewing-/embroidery computer if:
3
the cord or plug are damaged ►
it is not working properly ►
it has been dropped or damaged ►
it has fallen into water ►
Return the sewing-/embroidery computer to your
local authorized BERNINA dealer for examination or
repair.
Never operate the sewing-/embroidery computer 4
with any air openings blocked. Keep ventilation
openings of the sewing-/embroidery computer and
foot controller free from the accumulation of lint, dust
and loose cloth.
Keep fingers away from all moving parts. Special
5
care is required around the sewing needle.
Never drop or insert any objects into any openings
6
on the sewing-/embroidery computer.
Do not use the sewing-/embroidery computer
7
outdoors.
Do not operate the sewing-/embroidery computer 8
where aerosol products (sprays) or oxygen are being
used or where oxygen is being administered.
Do not pull or push fabric while stitching - this may
9
cause the needle to break.
Do not use bent needles.
10
Always use a proper BERNINA stitch plate. The 11
wrong plate can cause needle breakage.
To disconnect, turn all controls to the OFF («0»)
12
position, then remove the plug from the outlet. To
unplug, pull the plug not the cord.
Turn all controls OFF (to the «0» position) when
13
making any adjustments in the needle area - such as
changing or threading the needle, presser foot etc.
Always unplug the sewing-/embroidery computer
14
from the electrical outlet when removing covers,
lubricating, or when making other user servicing
adjustments mentioned in this instruction manual.
This sewing-/embroidery computer is provided with
15
double insulation (except USA and Canada). Use
only identical replacement parts. See instructions for
servicing of double-insulated products.
SERVICING DOUBLE
INSULATED PRODUCTS
In a double-insulated product two systems of insulation are
provided instead of grounding. No grounding means is
provided on a doubleinsulated product, nor should a
means for grounding be added to the product. Servicing a
doubleinsulated product requires extreme care and
knowledge of the system and should be done only by quali-
fied service personnel. Replacement parts for a double-
insulated product must be identical to those parts in the
product. A double-insulated product is marked with the
words «DOUBLE INSULATION» or «DOUBLE INSULA-
TED».
The symbol may also be marked on the product.
DISCLAIMER
No liability will be assumed for any possible damage which
arises from misuse of this sewing-/embroidery computer.
This sewing-/embroidery computer is intended for
household use only.
SAVE THESE
INSTRUCTIONS!
When using an electrical appliance, basic safety precau-
tions should always be followed, including the following:
Read all instructions before using this sewing-/embroidery
computer.
When the sewing-/embroidery computer is not in use,
it should be disconnected from the electricity supply
by removing the plug from the outlet.
DANGER!
To reduce the risk of electrical shock:
An appliance should never be left unattended 1
when plugged in.
Always unplug this sewing-/embroidery computer
2
from the electrical outlet immediately after using
and before cleaning.
LED Radiation – Do not view directly with optical
3
instruments. Class 1M LED product.