Bernina Record 830, Manual

Page: 19 / 212

19
Preparation
Double Needle
touch the Security Program icon ►
touch the appropriate needle icon (double needle) in the ►
Security Program screen
place a thread spool on the center spool pin and one on
►
the rear spool pin and thread the corresponding guides
on the telescopic rod
guide the thread from the rear spool pin into the
►
threading slit and the rear of the tension disc A . Insert
thread into the thread guide of the needle clamp
guide the thread from the center spool pin into the
►
threading slit and in front of the tension disc A . Insert
thread into the thread guide of the needle clamp
join both threads in one hand and guide them both in
►
the defined groove of the thread holder and pull them
back to front over the thread cutter, cutting both threads
touch the icon «Manual Threading» on the threading
►
animation screen. Next touch the illuminated automatic
threading button
using the manual threader in your accessory kit,
►
manually thread the left needle and then the right
needle
Triple Needle
in the Security Program select triple needle ►
place a thread spool on each spool pin and thread the ►
respective guides on the telescopic rod
thread as usual, guiding the thread from the rear and
►
center spool pin in the threading slit to the rear of
thread tension disc A and the thread from the front
spool pin in front of the tension disc A
Double/Triple Needle
Changing the thread
cut the spool thread before the pre-tension and pull out ►
of the sewing computer to front near the needle
A
A