Bernina Record 830, Manual

Page: 114 / 212

114
BSR
Activating the BSR Sewing Function:
1. With the Foot Control
plug in the foot control ►
lower the presser foot ►
start the BSR mode by pressing the foot control ►
a red light appears on the presser foot ►
the foot control must be pressed continuously during ►
sewing
the speed of the sewing computer will be regulated by
►
the movement of the fabric
by releasing the foot control the BSR mode stops
►
2. With the Start - Stop - Button
remove the foot control ►
lower the presser foot ►
start the BSR mode by pressing the Start-Stop-button ►
a red light appears on the presser foot ►
the speed of the sewing computer is regulated by the ►
movement of the fabric
by re-pressing the Start-Stop-button the BSR mode
►
stops
Deactivating the BSR Sewing Function
by using the Start - Stop - Button
Mode 1:
if the fabric is not moved for approx. 7 seconds, the ►
BSR mode is deactived and the red light on the presser
foot goes off
Holding the Work
hold and guide the taut fabric with both hands ►
abrupt movements of the fabric (slowing down, speed- ►
ing up respectively) can result in slightly too short or too
long stiches
continuous movement of the fabric (no abrupt move-
►
ments) under the foot will provide best results
move the fabric in one direction for best results
►
Application Example:
BSR With Zig-zag Stitch no. 2
the zig-zag stitch can be used for thread painting or ►
fabric embellishment for example
areas can be filled and forms or pictures created
►
BSR Function Deactivation
pull out the plug of the BSR presser foot connection ►
cable on the sewing computer. The straight stitch no. 1
is active
remove the BSR foot
►
Mode 2:
if the stitching process is ended by no longer moving the ►
fabric, one additional stitch is made depending on the
needle position. The sewing computer always stops with
the needle up, even if the arrow on the display points
down