Bernina Record 830 Manual Download Page 185

Page: 185 / 212

185

Troubleshooting

Step 8

Try to turn the handwheel clockwise until the

blockade is undone. Use considerable force if

required.

If this doesn‘t work, contact your BERNINA dealer.

Step 9

Remove bobbin, cutting the thread if required.

Step 10

Carefully remove any thread remnants with twee-

zers. If threads jam, slowly continue to turn hand-

wheel clockwise, pulling the threads out as soon as

they come free.

Step 11

Bring the hook in the pictured position (see on the

left) by turning the handwheel clockwise for correct

threading.

Step 12

Insert bobbin.

Step 13

Check the lower thread tension (see on the left) by

comparing the position of the lug with the figure in

the bobbin door.

Step 14 Swing hook in

completely

by turning the

handwheel counterclockwise, then close bobbin

door.

Step 15

Check the needle. If it is flawless, re-attach it. If i

not, use a new needle.

Step16

Connect the foot controller again.

Step 17

Confirm messages

Manual mode for trouble-

shooting

and

Main motor is not running

Check hook system

».

Error Message

Explanation

Repair

Summary of Contents for Record 830





















































































































































































































Search results

Summary of Contents for Record 830

Reviews:

Related manuals for Record 830

Brands by name

Popular brands

Bernina Record 830, Manual

Search results

Summary of Contents for Record 830

Reviews:

Related manuals for Record 830

Brands by name

Popular brands